Textured stucco walls1/8/2024 ![]() You will get the same look, similar durability, and decent energy efficiency at a fraction of the cost. You can save a considerable amount of money by switching to a synthetic stucco. ![]() If you love the look of stucco but don’t like the price tag, it’s understandable. Moreover, applying stucco is a highly labor-intensive endeavor. The materials are pretty pricey due to the high price of cement and the sheer quantity of cement that you will need for a full wall. If you want to have synthetic stucco instead, the price is far lower, at around $3.90 to $7.95 per square foot.īelieve it or not, stucco is considered to be one of the most expensive types of siding that you can buy. Most places will add stucco to a home’s siding for anywhere between $7 to $9 per square foot, depending on the type and the area you live in. To a point, stucco is remarkably steady when it comes to prices. EIFS assemblies with water management systems simply have an extra barrier. This barrier is also called a drainage plane, and it can be applied as a fluid or paper.Īlthough an EIFS assembly with a water management system obviously works harder to keep out moisture, all types of EIFS have a finish coat designed for that purpose. This variation of EIFS includes a moisture barrier applied on top of the substrate. The other option when working with EIFS stucco is an EIFS assembly with a water management system. EIFS Assembly With Water Management System The basic assembly system typically includes the adhesive base coat, foam, a fiberglass mesh base coat, an optional primer, and a finish coat. Instead, the system is applied directly over the substrate. Basic EIFS AssemblyĪ basic EIFS assembly is a more affordable option, but the downside is that it doesn’t include a water barrier. It’s optional to add a primer coat, and then all the layers are covered by the finish coat. Next is a base coat embedded into fiberglass mesh. ![]() The usual layers in EIFS stucco include a water and air barrier followed by adhesive base coat and foam. This system has special properties, such as increased air barriers and improved protection from water and moisture. ![]() The reason for this is that EIFS has multiple layers that form a complete wall system. It usually has an acrylic finish, but it’s different from the traditional hard-coat system due to its inner layers. From the outside, EIFS stucco looks just like a typical stucco installation. EIFS stands for Exterior Insulation and Finish System. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |